Manual.ly Logo

Amewi AMXRock AM18 Manual

0.0 · 0 Ratings

PDF manual · 11 Pages

English

M: OA-GPT-5-NAN
page

/ 11

Loading...
eac715d724e0c8eeee53f3d790752e2bb010 page 8
6. Functions of Transmitter
8
1. Unlock the handle on the back of the transmitter and pull
it out. Open the battery compartment by the handle.
2. Insert 4 AAA batteries.
Insert the batteries
Throttle
Steering
Wheel
REV
LED
3 CH
ST DR+/TRIM
TH DR-/ TRIM
TH DR+/TRIM
ON/OFF
ST DR-/TRIM
To change the direction of steering or throttle
press the REV switch as described above.
The distance from transmitter to vehicle
must be at least 40cm.
Bind
1
2
3
If the LED is flashing, please replace the batteries
ADJUST STEERING REVERSE
1. Please turn the wheel to left or right with max. angle and press
REV for 2 seconds, then ST will be reverse.
THROTTLE REVERSE
2. Please pull the throttle or push the trottle to max. position and
press REV for 2 seconds, then throttle will be reverse.
STEERING DR
Please turn the wheel to left or right with max angle and press ST-TRIM
or ST+TRIM, then adjust the angle of ST.
THROTTLE DR
Please pull the trottle or push the trottle to max. position and press
TH-TRIM or TH+TRIM, then adjust the angle of TH.
Throttle Trim: Trim the trottle slightly when the trigger
is in neutral position
Steering trim: If the front wheel do not straight, use
the steering trim to adjust
BRAKE
FORWARD
THROTTLE
NEUTRAL
1. Push the trigger forward to slow down or brake.
2. Pull the trigger backward to accelerate
STEERING WHEEL
LEFT RIGHT
NEUTRAL

Chat with your Amewi AMXRock AM18 manual using AI

Get instant AI answers from your Amewi AMXRock AM18 manual

Ask anything about the Amewi AMXRock AM18. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend AMXRock AM18?

Yes No

Frequently Asked Questions

A

The AMXRock AM18 uses a 2S 7.4V LiPo battery with a capacity of 600mAh. Use the supplied connector and charge via the provided USB charger, removing the battery promptly after charging and allowing it to cool before recharging.

Is this answer helpful?

A

Connect the battery to the receiver, insert the bind plug into the receiver to start fast LED blinking, power on the transmitter, then remove the bind plug once the receiver LED shows a steady light indicating a successful bind.

Is this answer helpful?

A

Gear mesh is the clearance between the motor pinion and the spur gear. Proper gear mesh ensures efficient power transfer and prevents damage to the pinion, spur, motor or ESC. Adjust and check mesh carefully according to the manual.

Is this answer helpful?

A

Use the REV switch on the transmitter: for steering, turn the wheel fully left or right and press REV for two seconds; for throttle, pull or push the trigger to max and press REV for two seconds to invert direction.

Is this answer helpful?

A

The transmitter requires four AAA batteries placed in the handle compartment. Replace batteries if the transmitter power LED flashes and ensure correct polarity to avoid damage.

Is this answer helpful?

A

Always power on the transmitter first, then the vehicle. After use, power off the vehicle first and then the transmitter to avoid unintended inputs and ensure safe shutdown.

Is this answer helpful?

A

AMEWI Trade is a wholesale distributor; for warranty claims and support, you should contact the retailer from whom you purchased the model. The manual also lists AMEWI contact details for general inquiries.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact, lightweight crawler (275mm length, 280g) ideal for tight courses and scale setups.
  • Serviceable design with exploded views for axles, gearbox, and chassis for easier maintenance.
  • Precise low-speed control via 2.4GHz transmitter, trims, dual-rate and reversible functions.
  • Durable drivetrain with high gear reduction (104:1) for torque-intensive crawling performance.
  • Clear battery and charging instructions to prolong pack life and improve safety.
VS

Disadvantages

  • Brushed 030 motor may lack longevity and efficiency compared to modern brushless alternatives.
  • Small 600mAh 2S LiPo limits runtime, requiring frequent recharges for extended sessions.
  • Lightweight construction (280g) may be less stable on very rough or high-impact courses.
  • Some maintenance tasks require careful gear-mesh adjustment to avoid damage.
  • Distributor is wholesale-focused; warranty support may require contacting the original retailer.
M: OA-GPT-5-NAN

Product Specification

Type

Car

Frequency

2.4GHz

Drive

Electric Motor

Special Features

LED Lighting

Dimensions

10.35x4.45x5.12in (LxWxH)

Weight

0.62lb

M: OA-GPT-54-NAN

Product Description

Amewi AMXRock AM18 Scale Crawler Off-road Vehicle grey Manual

The Amewi AMXRock AM18 Scale Crawler in grey is a compact, ready-to-run off-road vehicle engineered for hobbyists who enjoy detailed scale crawling and technical driving. At 275mm long with a 155mm wheelbase and weighing just 280g, the AM18 packs realistic design and crawling capability into a small package. It uses a 2S 7.4V 600mAh LiPo battery, a brushed 030 88T motor and a 2.4GHz digital transmitter, delivering controllable low-speed torque for rock crawling while remaining easy to maintain.

Built with durability and hobby-grade function in mind, the AM18 features a robust gear ratio (104:1) and clearly documented gearbox and chassis assemblies to help users maintain and repair the vehicle. The manual emphasizes correct gear mesh setup to protect the motor, pinion and spur gear, and includes exploded views for front and rear axles, gear box and chassis installation to simplify part identification and repair tasks.

The included transmitter offers standard RC control with steering wheel, throttle/brake trigger, dual-rate and trim adjustments, and reversible functions for both steering and throttle. Binding instructions and basic transmitter operation are straightforward: insert batteries, bind to the receiver, and follow LED feedback. The manual reminds users to power devices in the correct order (transmitter first, then vehicle) and to observe minimum separation during binding.

Charging and battery care are covered with practical guidance: charge via USB with the cable connected before attaching the battery, remove the battery promptly after charging, and allow the pack to cool before recharging. Safety notes warn against incorrect battery insertion in the transmitter and recommend contacting the retailer for warranty issues, reflecting the distributor’s wholesale business model.

Overall, the AMXRock AM18 offers an accessible entry into scale crawling with compact dimensions, serviceable components, and clear instructions. The grey finish provides a realistic, understated look suitable for rock gardens, tabletop courses, and backyard trails. Whether you’re maintaining gear mesh, adjusting transmitter trims, or replacing small parts, the manual supports routine setup and upkeep so the vehicle performs reliably on technical terrain.

Notes:

  • Verify gear mesh carefully to avoid damage to motor and gearing.
  • Observe correct power-up/power-down sequence: transmitter first, vehicle second.
  • Use recommended 2S 7.4V LiPo battery and follow cooling guidance before charging.
  • Keep receiver binding LED behavior in mind when pairing remote.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly