Manual.ly Logo

albert 1836 Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-5-NAN
page

/ 2

Loading...
b4717ed2ae1973452cdad7cd4f7279519906 page 2
Internet http://www.gebr-albert.de Email [email protected]

Ask a Question

0/1000

Do you recommend 1836?

Yes No

Frequently Asked Questions

A

The fixture uses a single E27 A60 incandescent lamp up to 75 W. As alternatives, certain compact fluorescent lamps (TC-D/TC-TSE) up to 15 W are listed (e.g., Osram Dulux EL LL 15 W, Philips Master PL-E 15 W), but compact fluorescents should not be used with the integrated motion sensor.

Is this answer helpful?

A

Yes. The luminaire is rated IP44 (splash-proof) and designed for both indoor and outdoor use. Ensure correct sealing of the cable gland and that installation follows local regulations. For safety, connect the protective earth as this is a Class I product.

Is this answer helpful?

A

Fix the supplied wall plate with the two provided screws in horizontal alignment (60 mm spacing), feed the mains cable through the cable gland, connect to the terminal block (2 x 2.5 mm²) and protective earth, attach the internal connector, and secure the luminaire onto the brass mounting screws with the provided nuts. Observe national electrical safety rules or hire a qualified electrician.

Is this answer helpful?

A

Always disconnect power before maintenance. Loosen the screws under the canopy, remove the glass, clean it with solvent-free cleaners, replace the bulb, and reassemble. For the motion sensor model, consult the sensor instructions for any handling specific to the detector.

Is this answer helpful?

A

LED bulbs with an E27 base and compatible physical dimensions can often be used, but verify fit under the glass diffuser and ensure the LED’s driver and sensor are compatible. For the sensor-equipped 1836, check that the LED operates reliably with motion detection or consult the sensor manual.

Is this answer helpful?

A

The light is Class I with a protective earth connection, rated IP44 for splash protection, and carries CE conformity marking. It is protected against solid objects larger than 1 mm and requires proper earthing during installation.

Is this answer helpful?

A

The integrated motion sensor’s settings and handling are provided in the separate sensor instruction leaflet included with the 1836 model. Refer to that manual for sensitivity, time-delay, and dusk/dawn adjustments.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • IP44 splash protection suitable for exterior and interior use.
  • Integrated motion sensor in model 1836 for hands-free activation.
  • Durable die-cast aluminum construction with clear acrylic diffuser.
  • Accepts standard E27 A60 bulbs up to 75 W or specified compact fluorescents when sensor not used.
  • Simple installation with supplied wall plate and 2-pole terminal (2 x 2.5 mm²).
VS

Disadvantages

  • Compact fluorescent bulbs are not compatible with the motion sensor feature.
  • Requires Class I protective earth—may need professional installation for compliance.
  • Limited to a single lamp—no multi-lamp or high-output option.
  • Uses E27 socket which may limit some modern LED retrofit compatibility without checking size/fit.
  • Sensor controls require reading the separate manual for configuration.
M: OA-GPT-5-NAN

Product Specification

Type

Wall light

Energy efficiency class suitable light source

A to G (A to G)

Old energy efficiency class suitable light source

A++ to E (A++ to E)

Permanently installed LEDs

no

Socket

1x E27 (max. 75W)

Light source

no

Material

Aluminum, Acrylic glass

Design

round

Special features

integrated motion sensor, integrated light sensor

Degree of protection

IP44

Protection class

1

Dimensions

11.61x7.87x13.78in (LxWxH)

M: OA-GPT-54-NAN

Product Description

Albert 1836 Sensor Wall Light Manual

The Albert 1836 Sensor Wall Light is a compact, weather-resistant wall luminaire designed for indoor and outdoor use. Built from die-cast aluminum with a clear acrylic diffuser, this fixture houses an E27 socket supporting a single A60 incandescent lamp up to 75 W or an alternative compact fluorescent lamp (up to 15 W), though compact fluorescent lamps are not suitable when the integrated motion sensor is used. The 1836 version includes a built-in motion detector, offering hands-free activation for pathways, entrances, and exterior walls.

Installation is straightforward for electricians or experienced DIYers: secure the supplied wall plate with two M6 positions spaced 60 mm apart, feed the mains through the cable gland, and connect to the two-pole terminal (2 x 2.5 mm²) plus protective earth. The unit meets IP44 splash protection and Class I earthing requirements; follow national electrical regulations during installation. The lamp accepts common TC-D/TC-TSE or equivalent compact lamps (Osram Dulux EL LL, Philips Master PL-E) when not using the sensor.

Maintenance requires switching off power before changing the lamp. Loosen the screws beneath the canopy, remove and clean the glass, replace the bulb, and reassemble. For the integrated motion sensor functions specific to the 1836 model, consult the supplied sensor instructions for sensitivity, time, and dusk/dawn adjustments. Use only solvent-free cleaners to maintain the finish and ensure longevity.

Practical and robust, this wall light suits residential and light commercial settings where simple, sensor-activated illumination is needed. With clear design lines and a durable build, it balances functionality with weather-tested reliability, while providing flexible lamp options for warm or energy-saving illumination.

Notes

  • The motion-sensor model (1836) is not compatible with compact fluorescent lamps when using the sensor — use recommended bulbs or follow sensor manual guidance.
  • Ensure correct earthing (protective conductor) during installation; the product is Class I.
  • Clean with solvent-free products only to avoid damaging the finish.
  • Follow local wiring regulations and, if unsure, hire a qualified electrician.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly