Manual.ly Logo

Ailoria Lustre Manual

0.0 · 0 Ratings

PDF manual · 24 Pages

English

M: OA-GPT-5-NAN
page

/ 24

Loading...
020791fc6d0b617b9dd5d005bf27a3b22769 page 8
8
Application
Place the desired sanding attachment - coarse grit for thick cornea,
ne grit for a soft nish - on the top of the product. Place it in place
and press until it clicks into place.
Switch on the charged electric cornea remover by pressing and
holding the on/o switch on the bottom for 2 seconds. The pro-
duct has 2 speed settings: Press and hold the on/o button for 2
seconds for smooth rotation. Pressing the on/o button again will
activate the higher speed setting.
Apply LUSTRE to the desired and previously cleansed areas of skin
and remove calluses. Do not hold the cornea remover in the same
place for more than 10 seconds. Do not apply strong pressure -
thanks to the advanced technology, it only needs to be gently ap-
plied to the skin.
Once you have achieved the desired result, switch o the cornea re-
mover with the on/o button on the bottom of the device by pres-
sing and holding it again for 2 seconds.
Changing the sanding attachment
Carefully pull the sanding head upwards with two ngers on the
notches and remove it.
Place the desired sanding head in the centre and press it down until
it locks into place.
Cleaning
Carefully remove the grinding head from the unit. Clean it under
warm water. Empty the container. The cornea remover must not
be cleaned under running water. Thanks to its soft surface, LUSTRE
can be easily cleaned with a soft, damp cloth.

Chat with your Ailoria Lustre manual using AI

Get instant AI answers from your Ailoria Lustre manual

Ask anything about the Ailoria Lustre. Answers come from this manual, with the pages they are based on.

Lustre Maintenance Schedule

After every use
Clean the sanding head and empty container

Remove the sanding head carefully. Clean it under warm water and empty the container. Do not clean the device under running water.

After every use
Wipe the device body

Clean the soft surface of LUSTRE with a soft, damp cloth after use.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Lustre?

Yes No

Frequently Asked Questions

A

The package typically includes the Lustre electric callus remover, two sanding heads (gentle and coarse), a 400 mAh Li-ION battery preinstalled, a USB charging cable, a USB charging adapter, a protective cap, and a small cleaning brush.

Is this answer helpful?

A

Charging takes about 1.5 hours. When fully charged, the device provides approximately 30 minutes of working time. The charge indicator light switches from red to green when fully charged.

Is this answer helpful?

A

Attach the desired sanding head until it clicks. Press and hold the on/off button on the bottom for 2 seconds to turn on (low speed). Press the button again to switch to the higher speed. Hold for 2 seconds to turn the device off.

Is this answer helpful?

A

Remove the sanding head and rinse it under warm water; empty the collection chamber. Do not submerge the device or clean it under running water. Wipe the body with a soft, damp cloth and store it in a dry, shaded place.

Is this answer helpful?

A

The device is intended for callus removal only. Do not use on smooth, irritated, inflamed, infected skin, open wounds, or scars. Consult a physician if you have diabetes or circulation issues. Keep away from children unless supervised.

Is this answer helpful?

A

No. The Lustre is not waterproof and must not be used in situations where it may contact water. If water enters the device, switch it off immediately and stop using it.

Is this answer helpful?

A

Pull the sanding head upward from the notches with two fingers to remove it. Position the new head centrally and press down until it snaps into place securely.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Two sanding heads (coarse and fine) for customizable exfoliation.
  • Integrated suction collects skin particles for cleaner use.
  • USB rechargeable with ~1.5-hour charge time and ~30 minutes runtime.
  • Compact, lightweight design with soft diamond-cut surface for grip.
  • Two speed settings and 360° rotation for versatile treatment angles.
VS

Disadvantages

  • Not waterproof; cannot be used in the shower or cleaned under running water.
  • Short runtime (~30 minutes) may require frequent recharging for heavy use.
  • Not suitable for irritated, infected skin, open wounds, or post-surgery areas.
  • Should not be used by unsupervised children under 8 or those unable to follow safety instructions.
  • Battery life may degrade if device is overcharged or misused.
M: OA-GPT-5-NAN

Product Specification

Operating mode

Battery operation (Li-Ion)

Color

green

Speed levels

2

Attachments

interchangeable rollers

Operating time

30min

Charging time

90min

Scope of delivery

USB charging cable, 4x attachment

M: OA-GPT-54-NAN

Product Description

Ailoria Lustre Electric Callus Remover Manual

Discover the Ailoria Lustre Electric Callus Remover, a compact USB-rechargeable device crafted to make at-home foot care safe, efficient, and mess-free. With a 400 mAh Li-ION battery, two interchangeable sanding heads (coarse and fine), and a 360° rotating sanding head, Lustre targets tough calluses while delivering a polished finish. The device features two speed settings for gentle to stronger exfoliation, an integrated suction function that collects skin particles, and a soft diamond-cut surface for comfortable handling. Charging is quick—about 1.5 hours for roughly 30 minutes of use—making it convenient for regular maintenance.

Engineered for ease of use, the unit is operated via a single on/off button with a charge indicator light. Attach the preferred sanding pad by pressing it into place until it clicks, hold the button for two seconds to power on or change speed, and glide the device over clean, dry skin. Avoid holding the tool in one spot for more than 10 seconds and do not apply excessive pressure; the technology is designed to work with light contact. Changing and cleaning the heads is straightforward: remove the pad by lifting at the notches, rinse the pad under warm water, empty the collection chamber, and wipe the device body with a soft damp cloth—do not submerge the unit or run it under water.

Safety guidance highlights that the device is intended solely for callus removal and must not be used on smooth, irritated, infected skin, open wounds, or immediately after surgery. Individuals with diabetes or circulation issues should consult a physician before use. Keep the product away from children unless supervised, and never disassemble the device. Proper disposal follows EU electronic-waste directives to minimize environmental harm.

Compact and lightweight (approximately 135 g, 6.6 x 6.6 x 9.8 cm), the Lustre is designed for home use and travel. The package typically includes the device, two sanding heads, a USB charging cable and adapter, a protective cap, and a small cleaning brush. Manufactured by VEHNS GROUP GmbH and branded under Ailoria, the product blends practical features with tidy collection and easy maintenance for smoother, healthier-looking feet.

Notes

  • Charge fully before first use; indicator turns from red to green when complete.
  • Do not use in wet environments or while bathing.
  • Replace or clean sanding pads regularly to maintain performance.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly