Manual.ly Logo

Aerotec Airliner Silent Manual

3.9 · 9 Ratings

PDF manual · 52 Pages

English

M: OA-GPT-54-NAN
page

/ 52

Loading...
cbc318cc29eeda4ef014853698d17dfb859a page c
G
B
12
3. SCOPE OF USE
The compressor is designed for generating compressed air for tools
operated by compressed air.
Please note that our equipment has not been designed for use
in commercial, trade or industrial applications. Our warranty will
be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The machine is to be used only for its prescribed purpose. Any other
use is deemed to be a case of misuse. The user/operator and not
themanufacturerwillbeliableforanydamageorinjuriesofanykind
caused as a result of this.
4. ELECTRICAL GROUNDING INSTRUCTIONS
This product should be electrically grounded. In the event of an
electricalshortcircuit,groundingreducestheriskofelectricalshock
by providing an escape wire for electrical current. This product is
equipped with a cord having a grounding wire with an appropriate
grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded in accordance with all local codes and
ordinances.
4.1 Connection of the mains plug
Important!
The wires in the mains lead fitted to this product are coloured in
accordance with the code shown in fig. 4.
● The3pinplugmustcomplytoBS1363/A.
● FusemustcomplytoBS1362.
If for any reason the 13 amp plug fitted to this product requires
replacement it must be wired in accordance with the following instruction:
Do not connect the brown (live) or blue (neutral) to the earth pin marked
‘E’ on the 3 pin plug.
Connect the Blue wire to the terminal marked Neutral (N). Connect
the Brown wire to the terminal marked Live (L). Connect the Yellow
& Green wire to the terminal marked Earth (E). Ensure that the outer
insulation is gripped by the cord grip and that the wires are not trapped
when replacing the plug cover. The mains lead on this product is fitted
with a 13 amp (BS1363/A) plug. A 13 amp (BS1362) fuse must be
fitted in the plug.
If in doubt consult a qualified electrician
There are no user serviceable parts inside this product except those
referred to in the manual. Always refer servicing to qualified service
personnel. Never remove any part of the casing unless qualified to do
so; this unit contains dangerous voltages.
Warning!
Foryourprotectionifthisproductistobeusedoutdoorsitshouldnot
be exposed to rain or used in damp locations. Do not place the product
ondampsurfaces,useaworkbenchifavailable.Foraddedprotection
use a suitable residual current device (R.C.D.) at the socket outlet.
Note: If the mains cable requires replacing it must be replaced with
an identical one and fitted by a qualified person.
5. PRE-START PROCEDURES
●
Examine the machine for signs of transport damage. Report any
damage immediately to the company which delivered the compressor.
● Verify that the tanks have been drained and are clear of any
moisture or dirt.
● Thecompressorshouldbesetupneartheworkingconsumer.
● Avoidlongairlinesandlongsupplylines(extensions).
● Makesuretheintakeairisdryanddust-free.
● Donotsetupthecompressorindamporwetrooms.
● The compressor mayonlybeused in suitablerooms(with good
ventilation and an ambient temperature from +5°C to +40°C). There
mustbenodust,acids,vapours,explosivegasesorinflammable
gases in the room.
● The compressor is designed to be used in dry rooms. It is
prohibited to use the compressor in areas where work is conducted
with sprayed water.
6. OPERATING INSTRUCTIONS
6.1 Start-Up Procedures
1. Verify that the On/Off switch is in the Off position.
2. Verify that the tank air pressure is at 0 PSI.
3. Attach the air hose to the discharge line.
4. Plug the unit into a properly grounded outlet.
5. Push the On/Off switch to On. The On/Off switch will light-up to
indicate the compressor is on. The compressor will automatically
cycle on and off to keep the tank pressure maintained .
6. Adjust the pressure regulator to the proper pressure setting
required for the air tool.
6.2 Shut-Off Procedures
1. Push in the On/Off switch to the Off position.
7. CLEANING AND MAINTENANCE
Warning!
Pull the power plug before doing any cleaning and maintenance
work on the appliance.
Warning!
Wait until the compressor has completely cooled down. Risk of
burns!
Warning!
Always depressurize the tank before carrying out any cleaning
and maintenance work.
7.1 Cleaning
●Keepthesafetydevicesfreeofdirtanddustasfaraspossible.Wipe
the equipment with a clean cloth or blow it with compressed air at
low pressure.
●Werecommendthatyoucleantheapplianceimmediatelyafteryou
use it.
●Cleantheapplianceregularlywithadampclothandsomesoftsoap.
Do not use cleaning agents or solvents; these may be aggressive to
the plastic parts in the appliance. Ensure that no water can get into
the interior of the appliance.
●You must disconnect the hose and any spraying tools from the
compressor before cleaning. Do not clean the compressor with
water,solventsorthelike.
7.2 Draining tank
The condensation water must be drained off each day by opening the
drain valve (ref. D) (on the bottom of the pressure vessel) (fig. 2).
1. Verify that the compressor is turned Off.
2. Holdingthehandle,tiltthecompressortowardthedrainvalveso
that it’s set in a lower position.
3. Open gently the drain valve.
4. Keep the compressor tilted until all moisture has been removed.
5. Close the drain valve.
Warning!
The condensation water from the pressure vessel will
contain residual oil. Dispose of the condensation water in an
environmentally compatible manner at the appropriate collection
point.
7.3 Safety valve (ref. F)
The safety valve has been set for the highest permitted pressure of the
pressurevessel.Itisprohibitedtoadjustthesafetyvalveorremoveits
seal. Actuate the safety valve from time to time to ensure that it works
when required. Pull the ring with sufficient force (fig. 3) until you can
hear the compressed air being released. Then release the ring again.
7.4 Storage
Warning!
Pull the mains plug out of the socket and ventilate the appliance
and all connected pneumatic tools.
Switch off the compressor and make sure that it is secured in
such a way that it cannot be started up again by any unauthorized
person.

Chat with your Aerotec Airliner Silent manual using AI

Get instant AI answers from your Aerotec Airliner Silent manual

Ask anything about the Aerotec Airliner Silent. Answers come from this manual, with the pages they are based on.

Airliner Silent Maintenance Schedule

Daily
Drain tank condensation water

Open the drain valve daily to remove moisture and oil residue from the pressure vessel. Tilt the compressor to ensure all liquid is removed.

Show in the manual (page 12)
After use
Clean exterior surfaces

Wipe the appliance with a clean damp cloth or blow it with low-pressure compressed air immediately after use.

Show in the manual (page 12)
Regularly
Test safety valve

Actuate the safety valve ring periodically by pulling until air escapes to ensure it functions correctly in an emergency.

Show in the manual (page 12)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Airliner Silent?

Yes No
0
User Pic

Lena Weber

9 months ago

Is this small portable compressor really as quiet as advertised? What is the realistic noise level during use, and is it suitable for indoor hobby work?

0
User Pic

Manual.ly

9 months ago

It is quieter than many other small compressors, but it is not whisper-quiet. Several buyers report that the real noise level is closer to the higher dB value printed on the unit (around the mid-80 dB range), while the lower marketing number can differ due to measurement conditions (distance and test standard). For indoor hobby tasks it is generally fine, especially for short jobs like inflating, blowing dust, or using air tackers/nailers, but you should still expect noticeable sound and consider hearing protection if you are sensitive. For louder tools like impact wrenches, a larger compressor is usually needed.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is best for light compressed-air tasks such as inflating, small pneumatic tools, and general workshop or garage work. The focus is on convenient, quieter operation rather than heavy industrial output.

Is this answer helpful?

A

No. The manual says it is designed for intermittent use and should not exceed a 25% duty cycle. Running it too long can cause overheating and trigger the thermal protection.

Is this answer helpful?

A

No. It is an oil-free compressor, which helps reduce routine maintenance and keeps operation cleaner. You still need to clean it regularly and drain condensation from the tank.

Is this answer helpful?

A

Use it only in dry, well-ventilated places with an ambient temperature between about +5°C and +40°C. Avoid dusty, damp, explosive, or flammable environments.

Is this answer helpful?

A

The unit includes a safety valve, pressure control, automatic cycling, and thermal protection against overheating. The manual also stresses correct grounding and stable placement during use.

Is this answer helpful?

A

No. The manual states that it is not intended for commercial, trade, or industrial use. It is better suited to light-duty, non-professional applications.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Quiet operation makes it suitable for workshops and home use where lower noise is preferred.
  • Oil-free design reduces upkeep and keeps routine maintenance simpler.
  • Portable build and handle make it easier to move and store.
  • Built-in safety and control features improve user confidence and air management.
VS

Disadvantages

  • Not designed for professional, trade, or industrial use.
  • Limited duty cycle means it should not run continuously for long periods.
  • Must stay in dry, ventilated areas away from dust, fumes, and moisture.
  • Tank condensation needs regular draining to prevent buildup and issues.
M: OA-GPT-54-NAN

Product Specification

Power

300W (230V), 0.49 hp

Intake capacity

18.49 gal/min

Output capacity

14.53 gal/min

Max. pressure

116.03 psi

Speed

2750/min

Tank capacity

1.59 gal

Features

oil-free pump, 1 cylinder, pressure gauge, pressure regulator, carrying handle

Noise level

85dB(A)

Dimensions (HxWxD)

11.81x13.39x12.60in

Weight

13.23 lb

M: OA-GPT-54-NAN

Product Description

Aerotec Airliner Silent Electric Compressor: Quiet Power for Everyday Workshop Jobs

The Aerotec Airliner Silent Electric Compressor is built for users who want practical compressed air performance without the constant noise and bulk of heavier workshop machines. It is an oil-free, portable unit designed to make everyday air tasks feel more manageable, especially in home garages, small workshops, and general maintenance spaces. The Aerotec Airliner Silent Electric Compressor Manual highlights a model focused on safety, ease of handling, and controlled operation rather than nonstop industrial output.

One of the most appealing qualities of this compressor is its quieter working style. For anyone who inflates tires, powers small pneumatic tools, or handles light cleaning and spraying jobs, lower noise can make a big difference. The manual also shows that the unit is meant to start automatically when tank pressure drops, helping maintain a steady working rhythm without unnecessary effort from the user.

The compressor includes a pressure regulator, a pressure gauge, a drain valve, a safety valve, and a quick coupler, all of which support simple day-to-day use. These features help users control air delivery more accurately, remove condensation from the tank, and connect tools with less hassle. The oil-free design also reduces maintenance concerns and keeps operation cleaner over time, which is useful for users who prefer a straightforward machine.

Safety is clearly a major part of the product’s identity. The guidance stresses stable placement, proper ventilation, dry environments, and careful handling of compressed air. It also warns users to avoid overworking the machine, since the compressor is designed for intermittent operation rather than constant heavy-duty use. That makes it a smart fit for short, repeated jobs where reliability matters more than raw capacity.

Overall, the Aerotec Airliner Silent Electric Compressor offers a balanced mix of portability, user-friendly controls, and lower-noise operation. It is a strong choice for people who want a dependable air source for routine tasks, provided they follow the recommended working limits and maintenance steps.

Notes

  • Best used in dry, well-ventilated spaces.
  • Drain the tank regularly to remove moisture.
  • Keep the duty cycle low to avoid overheating.
  • Do not use it for professional or industrial workloads.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly