Manual.ly Logo

ADATA XPG Invader Manual

0.0 · 0 Ratings

PDF manual · 18 Pages

English

M: QW-35-FL
page

/ 18

Loading...
108fcb7ebe7e75e2b1a46164c2baa2e0f66e page c
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Mode 11
Mode 12
Mode 13
Long Press
Red
Green
Blue
Purple
Yellow
White
Orange
Green
OFF
Enter/ exit music mode
Four different color
breathing mode
Four different color
rainbow mode
PRESS LIGHTING
TOGGLE BUTTON
RGB EFFECT ARGB EFFECT
Leads Installation Guide
Please consult your user manual of your motherboard manufacturer, then connect these
leads to the panel header on the motherboard.
USB 3.0 Connection : Please consult your motherboard manual to find out section of USB
3.0 connection.
Audio Connection : Please refer to the motherboard installation to connect the Audio
Connector to avoid the device error and cause the motherboard sound device to be damaged.
Specifications
Dimension (H*W*D)
Form Factor
Side Panel
Color
Material
3.5" HDD/HDD tray
2.5" HDD/SSD tray
470*206*482mm (18.74*8.11*18.97 inch)
Mini-ITX, Micro-ATX, ATX
4mm Tempered Glass*1(Left Side)
Exterior & Interior : Black / White
SPCC
2
2+2(Combo 3.5”/2.5”)
USB 3.0 * 2 , Audio*1
HD Audio ( Mic & SW ) * 1 , LED Control * 1
Front: 3*120mm , 2*140mm Top: 2*120mm
Rear: 1*120mm Bottom:1*120mm Right Side : 2*120mm
IO Port
Front:360/240mm Top:240mm
Right Side : 1*240mm Rear:120mm
Radiator Support
Fan Support
CPU Cooler Height Limitation : 170mm
Graphic Card Length Height Limitation : 400mm
PSU Height Limitation : 225mm
Clearance
2221

Chat with your ADATA XPG Invader manual using AI

Get instant AI answers from your ADATA XPG Invader manual

Ask anything about the ADATA XPG Invader. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend XPG Invader?

Yes No

Frequently Asked Questions

A

ADATA Technology Co. Ltd. provides a two-year warranty period for this product unless regional laws state otherwise. This is a limited warranty covering repairs or replacements of products manufactured by ADATA and authorized partners.

Is this answer helpful?

A

The chassis supports various fan sizes including three 120 mm fans at the front and two at the top. Rear and bottom positions also support 120 mm fans allowing for flexible cooling configurations.

Is this answer helpful?

A

Yes, this chassis supports Mini-ITX, Micro-ATX, and ATX form factors providing versatility for different build sizes and performance requirements.

Is this answer helpful?

A

Use a clean damp cloth to clean the product properly. Do not apply any soap or solvent agent on the surface to preserve its integrity and avoid damage to the finish.

Is this answer helpful?

A

The graphic card length limitation is 400 mm. Users must ensure their GPU fits within this clearance to install properly without obstruction.

Is this answer helpful?

A

Yes, liquid cooling is supported with mounts for up to 360 mm radiators at the front and 240 mm at the top. This allows for efficient heat dissipation.

Is this answer helpful?

A

The exterior and interior colors come in Black or White options. Both finishes are made from SPCC material providing a sleek look.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Four millimeter tempered glass side panel offers superior visibility
  • Includes two 120 mm fans for immediate cooling deployment
  • Supports Mini-ITX, Micro-ATX, and ATX motherboards
  • Integrated RGB lighting toggle button for easy control
  • Magnetic dust filters ensure easy tool-less maintenance
VS

Disadvantages

  • Warranty is void if the label is altered, damaged, or missing
  • Cleaning instructions restrict use to damp cloth only
  • Operation limited strictly to zero to forty degrees Celsius range
  • Graphic card length limit is capped at 400 mm maximum
  • CPU cooler height restriction set at 170 mm maximum
M: QW-35-FL

Product Specification

External

N/A

Internal

2x 2.5"/3.5" (Horizontal, Drive Rails), 2x 2.5"

Connections

2x USB-A 3.0 (5Gb/s), 1x 3.5mm Jack (Line-Out), 1x 3.5mm Jack (Line-In)

PCI Slots

7

Fan (Front)

1x 4.72 inches or 3x 4.72 inches (optional) and 2x 5.51 inches (optional)

Fan (Rear)

1x 4.72 inches

Fan (Left)

N/A

Fan (Right)

2x 4.72 inches (optional)

Fan (Top)

2x 4.72 inches (optional)

Fan (Bottom)

1x 4.72 inches (optional)

Fan (Other)

N/A

Radiator Sizes

4.72/9.45/14.17 inches front, 4.72/9.45 inches top, 4.72 inches rear, 9.45 inches right

Motherboard

Up to ATX

Supported Motherboards

Mini-ITX (6.7"x6.7")/Micro-ATX (9.6"x9.6")/ATX (12"x9.6")

Power Supply

ATX (max. 8.86 inches deep)

Power Supply Position

bottom

CPU Cooler

Max. 6.69 inches height

Graphics Cards

Max. 15.75 inches

Lighting

RGB Header 3-Pin ARGB (+5V/DATA/GND), integrated LED controller, integrated RGB LED lighting

Dimensions (WxHxD)

8.11x18.50x18.98 inches

Volume

1.65 cubic feet

Case Type

Midi Tower

Front

Closed, Ventilation Slots on Sides, Dust Filter Inside

Top

Partially Closed, Mostly Fan Grille, Dust Filter Outside

Bottom

Partially Closed, Mostly Fan Grille, Dust Filter Outside

Left

Closed, Glass

Right

Partially Closed, Fan Grille Front

Rear

Partially Closed, Fan Grille Top Right, PCI Slots (7x Horizontal)

Front I/O Position

Case Side: Top, Height: Front, Position: Center

Features

Cable Management, Dust Filter, Glass View Window

USB Labeling

Left

M: QW-35-FL

Product Description

ADATA XPG Invader Overview

The ADATA XPG Invader stands as a robust mid-tower PC chassis designed for enthusiasts seeking both style and functionality within a compact frame. This system supports Mini-ITX, Micro-ATX, and ATX motherboards, offering significant versatility for various build sizes and performance needs. The exterior features a sleek black or white finish with four millimeter tempered glass on the left side panel. This glass provides a crystal clear view of internal components while maintaining structural integrity during transit or operation. Inside, users find plenty of room for major components like GPUs up to 400 mm in length and high profile CPU coolers reaching 170 mm tall.

Build Features

Cable management is streamlined with spacious areas and pre-installed tie points to keep the interior tidy. The chassis includes a magnetic front panel and a magnetic dust filter to keep dust out effectively without requiring any tools for removal. For active cooling, there are mounts for three 120 mm fans at the front and two at the top rear. The rear and bottom positions also support 120 mm fans, allowing for efficient airflow configurations tailored to thermal requirements. Liquid cooling is fully supported with radiator mounts for up to 360 mm at the front and 240 mm at the top.

Installing components is straightforward and guided by the clear steps found in the official ADATA XPG Invader Manual guidance resources. Drive support includes multiple brackets for 3.5 and 2.5 inch storage devices to expand capacity. Power supply integration is secure with a specific bracket and rear holder designed for stability. Audio and connectivity are handled via front I/O ports which include USB 3.0 and hybrid audio jacks for headphones and microphones. RGB lighting control is integrated with a toggle button on the top for easy cycle adjustments without entering software.

Safety is prioritized with temperature operation ranges from zero to forty degrees Celsius to prevent overheating. Users are strictly advised to keep the device away from liquids to prevent electrical hazards. Should maintenance be needed, cleaning with a damp cloth is recommended over harsh chemical solvents. Warranty terms are covered for two years by the manufacturer provided no unauthorized damage occurs. This warranty ensures repairs are handled professionally unless specific exclusions like natural disasters or tamper evident labels apply. Overall, this case balances aesthetic appeal with practical cooling and build support, making it a strong choice for modern gaming rigs. Additional notes include ensuring proper ventilation and avoiding excessive humidity. Proper care ensures longevity and optimal performance standards are met consistently over time.

M: QW-35-FL

© Copyright 2026 Manual.ly