ADATA XPG Core Reactor Manual
PDF manual · 52 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your ADATA XPG Core Reactor manual using AI
Get instant AI answers from your ADATA XPG Core Reactor manual
Ask anything about the ADATA XPG Core Reactor. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend XPG Core Reactor?
Yes NoFrequently Asked Questions
ADATA provides a 10 year warranty period unless regional laws state otherwise regarding repairs.
Is this answer helpful?
Yes, it supports Intel Haswell C6 C7 sleep mode function with zero amps minimum loading.
Is this answer helpful?
No you must use only the modular cables bundled with the power supply unit for safety.
Is this answer helpful?
It has OCP OVP OPP OTP and SCP designed per Intel ATX Design Guide for full safety.
Is this answer helpful?
The size is 150 mm x 140 mm x 86 mm fitting standard PC cases easily.
Is this answer helpful?
Cycle the DC remote on off or AC power to reset the main output after fault removal.
Is this answer helpful?
Never under any circumstances open the power supply unit as it is extremely dangerous due to high voltage.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- 80 PLUS Gold efficiency rating ensures low cost operation for high performance builds effectively.
- Fully modular cable set provides user convenience and easy cable management in any case.
- 10 years warranty period covers repairs or replacements for peace of mind and reliability.
- Multiple integrated protection circuits like OCP OVP and OTP keep components safe always.
- Japanese 105C capacitors guarantee durability and stability under heavy load conditions.
Disadvantages
- Limited to specific wattage options like 650W 750W and 850W only for selection range.
- Requires using only bundled modular cables to maintain warranty conditions strictly.
- Fan control circuit allows very low RPM which might be sensitive to dust buildup.
- No load operation support depends on specific Intel motherboard features available.
- Installation instructions require strict adherence to safety guidelines strictly for safety.
Product Specification
Fan
4.72in, 660-2400 RPM
Cable Management
fully modular
80 PLUS Certification
80 PLUS Gold (115V, per 80 PLUS certification)
Dimensions (WxHxD)
5.91x3.39x5.51in
Manufacturer Warranty
10 years
-12V
0.3A
+5Vsb
3A
Number of 12V Rails
1
PFC
active
Form Factor
ATX PS/2
Specification
ATX 2.4
Features
ErP Level 6
Color
Black
Product Description
Exploring the XPG Core Reactor Gold Series Performance
Welcome to our detailed analysis of the XPG Core Reactor Gold Series power supply units. These units are engineered for silence and extreme power performance. Designed with an 80 PLUS Gold efficiency rating, they ensure low-cost operation for demanding PCs. A standout feature is the 120mm cooling fan featuring extremely low RPM fan control circuit design. This allows the fan to operate efficiently and silently, reducing noise during light loads. For builders, the fully modular cable set provides user convenience. This simplifies builds within cases with limited space. XPG Core Reactor Gold uses high quality 105C Japanese capacitors throughout. This choice is a great foundation for a high performance PC. For technical specifics, the ADATA XPG Core Reactor ATX 2.4 Manual serves as a guide for integration standards.
Safety and Protection circuits are integral to the design. The main outputs latch off when any protection triggers. Resetting requires cycling the DC remote or AC power. Over Current Protection follows Intel guidelines with 110% to 140% of total current on all rails. Over Voltage Protection shuts down the PSU if DC outputs exceed set levels. Over Power Protection handles up to 150% of total wattage. Over Temperature Protection ensures the unit shuts down if internal temperatures reach dangerous points. No Load Operation is supported to enable Intel Haswell C6 and C7 sleep mode function with zero amps minimum. Short Circuit Protection defines the shutdown condition if output impedance drops below 0.1 ohms. This ensures no damage occurs to your PC components if a short circuit happens inside the system. XPG power supplies have full protection circuits on board to keep expensive components safe.
Installation requires turning off the AC power switch. Use a screwdriver to install the power supply correctly. Connect the 18+10pin modular cable connector to the PSU modular socket. Connect the 20+4 pin MB connector to the 24 pin socket on the motherboard. Connect the CPU power and VGA power as required. Cable ties and thumb screws are included in the box. The warranty is 10 years unless regional laws differ. Avoid dust and humidity. Do not place objects in front of the fan. Use only bundled cables. Failure to comply voids warranties. This unit is for integration into a computer only. It is not for external usage. By following these steps, you ensure longevity and safety for your rig. The dimensions are 150 mm x 140 mm x 86 mm. AC input is 100 to 240 VAC. The cable listing shows long lengths for flexibility. The 24 pin cable is 650 mm plus or minus 10 mm. The PCIe cable is also 650 mm plus or minus 10 mm. SATA cables measure 500 mm plus or minus 10 mm. Peripheral cables match this length too. The fan speed varies from 200 to 1800 rpm depending on load. This dynamic speed helps manage thermal output. The warranty label should not be altered. Product serial number must conform. Unauthorized agents invalidate the warranty. Damage from natural calamities is not covered. Abuse outside intended operation voids protection. Contact support if the system does not turn on. Check the AC main power cord connection first. Ensure the source is switched on. Verify the switch is in the I position. Verify MB and CPU sockets are connected correctly. Consult the manual for FAQs at the product website.
Search for 67,706 Manuals online
Type-in Brand or Model