Manual.ly Logo

ABL eMH3 Manual

0.0 · 0 Ratings

PDF manual · 36 Pages

English

M: QW-35-FL
page

/ 36

Loading...
180d7f8da6ff8cbd8d61053ecc742c81e5e6 page 1
VERSION: EMH3-2016-10-28-UM
ARTICLE NO. 0301590
Operating Manual
Wallbox
eMH3

Chat with your ABL eMH3 manual using AI

Get instant AI answers from your ABL eMH3 manual

Ask anything about the ABL eMH3. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend eMH3?

Yes No

Frequently Asked Questions

A

Yes, the twin model features two Type 2 sockets. It can charge two vehicles simultaneously with 11 kW each or one vehicle with the full 22 kW using its internal load management system.

Is this answer helpful?

A

No, the RFID module is deactivated by default. A qualified electrician must activate it during installation if you wish to use access cards for charging authorization.

Is this answer helpful?

A

The integrated DC-RCM detects any direct current leakage immediately. The system will automatically shut down to prevent electric shock or damage to the vehicle battery.

Is this answer helpful?

A

No, German law and safety standards require that the mechanical and electrical installation be performed by a qualified electrician to ensure safety and maintain the warranty.

Is this answer helpful?

A

To reset the cards, turn off the main power supply, hold the Teach-In card against the reader, and then turn the power back on. Wait for the green LED to blink three times before removing the card.

Is this answer helpful?

A

The ABL eMH3 Twin is designed to operate safely at altitudes up to 2,000 meters above sea level.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Dual Type 2 sockets allow simultaneous charging of two vehicles
  • Integrated DC-RCM and Type A RCCB provide superior electrical safety
  • Intelligent load management optimizes power distribution up to 22 kW
  • IP54 rated enclosure offers excellent protection against dust and water
  • Optional RFID module enables secure access control for multiple users
VS

Disadvantages

  • Requires professional installation by a certified electrician
  • RFID access control must be activated separately during setup
  • Internal components cannot be serviced by end-users without voiding warranty
  • No built-in Wi-Fi connectivity for remote monitoring via app
  • Initial setup requires physical access to the internal electronics cabinet
M: QW-35-FL

Product Specification

Number of Charging Points

2

Charging Mode

IEC 61851-1 (Mode 3)

Number of Phases

3-phase

Voltage

400V (AC)

Connection Type

Type 2

Installation

Wall-mounted

Interfaces

RS-485

Protection Class

IP54

M: QW-35-FL

Product Description

ABL eMH3 Twin: The Future of Smart Electric Vehicle Charging

Welcome to the world of efficient and safe electric mobility with the ABL eMH3 Twin. This wallbox represents a significant leap forward in home and commercial charging solutions, designed specifically for those who demand reliability, speed, and intelligent management. Manufactured entirely in Germany, the ABL eMH3 Twin combines robust engineering with intuitive user interfaces to ensure your electric vehicle charges safely every time.

The ABL eMH3 Twin is engineered to handle high-power charging needs with ease. It features dual Type 2 sockets, allowing you to charge two vehicles simultaneously or manage power distribution intelligently between them. Whether you need to split the load to 11 kW per socket or dedicate the full 22 kW to a single vehicle, this unit adapts to your specific requirements. The internal load management system ensures that your electrical installation is never overloaded, providing peace of mind alongside performance.

Safety is at the core of the eMH3 design. The unit comes equipped with an integrated DC residual current monitor (DC-RCM) and a Type A RCCB, offering comprehensive protection against electrical faults. This advanced safety architecture detects dangerous direct current leakage instantly, shutting down the system before any harm can occur. Furthermore, the sturdy IP54-rated enclosure protects the internal electronics from dust and water splashes, making it suitable for both indoor garages and outdoor installations.

User control is simplified through the optional RFID module. While deactivated by default, this feature can be easily activated by a qualified technician to restrict access to authorized users only. The system supports standard MIFARE Ultralight cards, allowing you to manage who can charge your vehicles. LED indicators provide clear visual feedback on the status of the charging process, authentication, and any potential errors, ensuring you are always informed without needing to open the casing.

Key Features

The ABL eMH3 Twin stands out due to its flexibility and adherence to strict European standards. It complies with IEC 61851-1 Mode 3 regulations, guaranteeing compatibility with a wide range of modern electric vehicles. The modular design allows for easy maintenance and future upgrades, while the included mounting kit ensures a secure and professional installation on any wall surface.

Important Notes

Always ensure that the wallbox is installed by a qualified electrician to maintain warranty validity and safety compliance. Regular testing of the internal RCCB is recommended every six months to verify proper functionality. Keep the manual accessible for troubleshooting and reference regarding LED error codes.

M: QW-35-FL

© Copyright 2026 Manual.ly