4iiii PRECISION 3 Shimano 105 R7000 Manual
PDF manual · 16 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your 4iiii PRECISION 3 Shimano 105 R7000 manual using AI
Get instant AI answers from your 4iiii PRECISION 3 Shimano 105 R7000 manual
Ask anything about the 4iiii PRECISION 3 Shimano 105 R7000. Answers come from this manual, with the pages they are based on.
PRECISION 3 Shimano 105 R7000 Maintenance Schedule
Replace the CR2032 coin cell battery when riding time reaches up to 800 hours or if low battery error occurs.
Use water and mild soap to clean the crank. Check the o-ring on the battery cap for wear and lubricate with silicone grease.
Ask a Question
Do you recommend PRECISION 3 Shimano 105 R7000?
Yes NoFrequently Asked Questions
Spin the crank 3–4 times to wake the power meter, then add it as a sensor on your ANT+ or Bluetooth-compatible head unit, or connect via the 4iiii app and follow on-screen prompts. The ANT+ ID is etched on the pod for identification.
Is this answer helpful?
Unclip and dismount, spin the crank to wake the unit, position the cranks at 12 and 6 o’clock with the non-drive side down, keep the bike upright and stable, then select Zero or Calibrate on your head unit or tap the Zero Offset icon in the 4iiii app.
Is this answer helpful?
The Precision 3 uses a CR2032 coin cell battery. Expect up to approximately 800 hours of riding. Replace the battery by twisting off the cap, inserting the new battery with the + side facing the cap, and ensuring the o-ring is in good condition for a watertight seal.
Is this answer helpful?
Yes. The Precision 3 ships single-sided but can be linked with a compatible right-side 4iiii power meter via the 4iiii app to enable dual-sided metrics, power balance, and enhanced analysis.
Is this answer helpful?
On wake the LED cycles red, green, blue. Red blinks indicate battery level (1–5). Blue blinks show zero-offset success or error codes (e.g., unstable gauge, low battery, firmware mismatch). Consult the manual or app for specific error resolutions.
Is this answer helpful?
Connect to the Precision 3 in the 4iiii app (iOS/Android). If firmware is available you’ll be prompted; select Update and keep the app open until completion. Use the app to rename the device, set scale-factor compensation, or enable third-party compatibility modes.
Is this answer helpful?
Clean with water and mild soap only, avoid pressure washing or harsh chemicals, check and lubricate the battery cap o-ring with silicone grease, store within the recommended temperature range, and replace worn o-rings or battery covers as needed.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- High accuracy: ±1.0% power measurement for dependable training data.
- Lightweight and compact: 9 g pod with IPx7 weather sealing for durability.
- Flexible connectivity: ANT+ and Bluetooth Smart for wide head unit compatibility.
- Long battery life: CR2032 coin cell provides up to ~800 hours of ride time.
- App integration: 4iiii app supports firmware updates, dual linking, and scale-factor tuning.
Disadvantages
- Single-sided by default: requires a compatible right-side unit for full dual-sided data.
- Battery access: small CR2032 cap and o-ring require careful handling to maintain seal.
- Limited to left-side OEM fit: specific to Shimano 105 R7000 172.5mm crank arm configuration.
- Pairing quirks: Bluetooth can only be connected to one device at a time, requiring management.
- Exposure risk: swallowing button battery is hazardous; keep away from children.
Product Specification
Type
Crank Arm
Colors
black
Crank Arm Length
6.79 in
Battery Life
800h (CR2032)
Accuracy
±1%
Data Transmission
ANT+, Bluetooth Smart
Weight
0.02 lb
Product Description
4iiii Precision 3 Shimano 105 R7000 172.5mm crank arm Manual
The 4iiii Precision 3 for Shimano 105 R7000 (172.5mm) is a lightweight, high-accuracy left-side power meter integrated into a Shimano crank arm that delivers precise power and cadence data for road cyclists. Designed for easy installation and everyday use, the Precision 3 uses a CR2032 battery, supports ANT+ and Bluetooth Smart, and offers ±1.0% power accuracy. Its compact, 9 g pod and IPx7 weather sealing make it durable for varied conditions while maintaining reliable wireless performance up to 15 meters.
What it does
The unit measures left-side power and cadence, and can function as a single-sided meter or be linked with a compatible right-side 4iiii power meter for dual-sided metrics and power balance. It broadcasts standard cycling metrics (instant power, smoothed power intervals, cadence, normalized power, and advanced telemetry like torque effectiveness and pedal smoothness) to head units and smartwatches. Pairing is supported over ANT+ and Bluetooth; the ANT+ ID is etched on the pod for easy identification.
Setup and everyday use
Waking and pairing are simple: spin the crank 3–4 times to wake the sensor, then add it on your head unit or in the 4iiii mobile app. Zero-offset calibration (recommended before rides) is performed with the cranks at 12 and 6 o’clock while the bike is upright. The 4iiii app (iOS/Android) enables device configuration, firmware updates, scale-factor adjustments, dual-power linking, and advanced compatibility modes for third-party devices.
Maintenance and battery
The Precision 3 uses a CR2032 coin cell offering up to ~800 hours of riding. Battery replacement is a user serviceable twist-off cap—observe o-ring condition and use silicone grease to maintain a watertight seal. Clean with water and mild soap; avoid degreasers, abrasive agents, or pressure washing. Store between -40°C and 60°C.
Troubleshooting and indicators
The LED startup sequence shows red, green, blue then red flashes to indicate battery level. Blue flashes communicate zero-offset and error states. Common fixes include ensuring the unit is awake, performing a zero offset, checking battery level, re-pairing the sensor, and updating firmware via the 4iiii app.
Specs and compliance
Key specs include ±1.0% accuracy, IPx7 sealing, Bluetooth and ANT+ communication at up to 15 meters, cadence range 30–170 RPM, and power range up to 4000 W. The product carries regulatory certifications and a limited three-year warranty covering defects in materials and workmanship, with exclusions for misuse and unauthorized repair.
Notes
- Perform a zero offset when ambient temperature stabilizes for best accuracy.
- Use the 4iiii app to enable dual-sided metrics, perform firmware updates, and set scale-factor compensation.
- Keep replacement batteries and o-rings on hand; test LED start-up sequence for battery status.
- Avoid pressure washing and harsh chemicals; follow torque and crank installation guidance from Shimano or a qualified mechanic.
Search for 67,706 Manuals online
Type-in Brand or Model